Following instruction on this page you can test if your host has accses to the public internet.
On the machine host that runs your service run command below to prove that it has access to public internetthe next command:
| Code Block |
|---|
|
echo quit | timeout 3 telnet 8.8.8.8 53 |
Above The above command will try for three seconds to connect to a commonly knonw name known named server hosted by google (port 53 is the default port for DNS services).
| Panel |
|---|
| panelIconId | atlassian-light_bulb_on |
|---|
| panelIcon | :light_bulb_on: |
|---|
| panelIconText | :light_bulb_on: |
|---|
| bgColor | #FFFAE6 |
|---|
|
TIP: If google services are not available in your organizationorganisation, please pick a suitable alternative IP address port pair. In the UK echo quit | timeout 3 telnet 1.1.1.1 53 is probably a good pick IF you are not limited to N3/HSNC. 1.1.1.1 is cloudflare managed domain server. |
Expected success output
| Code Block |
|---|
Trying 8.8.8.8...
Connected to 8.8.8.8.
Escape character is '^]'.
Connection closed by foreign host. |
| Tip |
|---|
This means that your machine can establish a network connection to a google server on port 53. |
Expected failure output
| Code Block |
|---|
Trying 8.8.8.8... |
| Warning |
|---|
Absence of Connected to 8.8.8.8. indicates that your client cannot establish a network connection to a 8.8.8.8 server on port 53. |
...
| Panel |
|---|
| panelIconId | 1f3c1 |
|---|
| panelIcon | :checkered_flag: |
|---|
| panelIconText | 🏁 |
|---|
| bgColor | #DEEBFF |
|---|
|
TIPNEXT: Try to resolve the issue within your organization. |
...
