Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Query for the date of last data point for patients by BSN

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

Example request

{ "resourceType": "Parameters", "parameter": [ { "name": "patientIdentifier", "valueIdentifier": { "system": "http://fhir.nl/fhir/NamingSystem/bsn", "value": "974189273" } }, { "name": "patientIdentifier", "valueIdentifier": { "system": "http://fhir.nl/fhir/NamingSystem/bsn", "value": "995604381" } } ] }

Example response

{ "resourceType" : "Parameters", "parameter" : [ { "name" : "lastDataPointsResult", "part" : [ { "name" : "patientIdentifier", "valueIdentifier": { "system": "http://fhir.nl/fhir/NamingSystem/bsn ", "value": "974189273" }, "lastRecordUpdate" :"2020-08-01T09:57:34.2112Z" } ] }, { "name" : "lastDataPointsResult", "part" : [ { "name" : "patientIdentifier", "valueIdentifier": { "system": "http://fhir.nl/fhir/NamingSystem/bsn ", "value": "995604381" }, "lastRecordUpdate" :"2020-08-01T09:57:34.2112Z" } ] } ] }

Query for the date of last data point for patients by PKB UUID

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

Example request

{ "resourceType": "Parameters", "parameter": [ { "name": "patientIdentifier", "valueIdentifier": { "system": "urn:uuid:cd97da65-0aa4-43a6-b695-cfd0c6f3267d", "value": "3d8afd18-0844-459a-b3c2-355d02e54c0a" } }, { "name": "patientIdentifier", "valueIdentifier": { "system": "urn:uuid:cd97da65-0aa4-43a6-b695-cfd0c6f3267d", "value": "f8a1836e-c171-4b33-b8d7-f3f059b63eab" } } ] }

Example response

{ "resourceType" : "Parameters", "parameter" : [ { "name" : "lastDataPointsResult", "part" : [ { "name" : "patientIdentifier", "valueIdentifier": { "system": "urn:uuid:cd97da65-0aa4-43a6-b695-cfd0c6f3267d", "value": "3d8afd18-0844-459a-b3c2-355d02e54c0a" }, "lastRecordUpdate" :"2020-08-01T09:57:34.2112Z" } ] }, { "name" : "lastDataPointsResult", "part" : [ { "name" : "patientIdentifier", "valueIdentifier": { "system": "urn:uuid:cd97da65-0aa4-43a6-b695-cfd0c6f3267d", "value": "f8a1836e-c171-4b33-b8d7-f3f059b63eab" }, "lastRecordUpdate" :"2020-08-01T09:57:34.2112Z" } ] } ] }

Generate an invitation token for a specific patient

This example demonstrates how to generate an invitation token for a single, specific patient based on their NHS number.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: eyJhbGxxxx

  2. Confirm the ID of the Organization

    1. The example below assumes you have an ID of: 235a397b-1ae8-4755-9c77-1a0e2fbc5314

  3. Confirm the NHS number of the patient

    1. The example below assumes an NHS number of: 9999999999

  4. Make the call as detailed below, replacing the access token, organisation ID and NHS number with your own values

    1. The invitation token will be returned

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X POST --header "Accept: application/fhir+json" --header "Content-Type: application/fhir+json" --header "Authorization: Bearer eyJhbGxxxx" --header "X-Org-Public-Id: 235a397b-1ae8-4755-9c77-1a0e2fbc5314" "https://sandbox.patientsknowbest.com/fhir/Organization/$generate-invitation-tokens" --data "{ \"resourceType\": \"Parameters\", \"parameter\": [ { \"name\": \"patientIdentifier\", \"valueIdentifier\": { \"system\": \"https://fhir.nhs.uk/Id/nhs-number\", \"value\": \"9999999999\" } } ] }"

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType": "Parameters", "parameter": [ { "name": "patientIdentifier", "valueIdentifier": { "system": "https://fhir.nhs.uk/Id/nhs-number", "value": "9999999999" } } ] }

Example response

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType": "Parameters", "parameter": [ { "name": "patientTokens", "part": [ { "name": "patientIdentifier", "valueIdentifier": { "system": "https://fhir.nhs.uk/Id/nhs-number", "value": "9999999999" } }, { "name": "code", "valueString": "aaaaaaaaaa" }, { "name": "token", "valueString": "bbbbbbbbbb" }, { "name": "expiry", "valueDatetime": "2021-01-01T09:29:23.356+00:00" } ] } ] }

Search for laboratory results, returning at most 1 per day

This example demonstrates how to query for laboratory results for a specific patient, within a given date range, returning at most 1 resource per day.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: aaaaa-bbbbb

  2. Confirm the Patient reference of the Patient you are interested in

    1. The example below assumes a reference of: Patient/3d8afd18-0844-459a-b3c2-355d02e54c0a

  3. Confirm the start of the date range you are interested in, and whether the date is inclusive (ge) or exclusive (gt)

    1. The example below assumes a start date of: ge2018-01-01

  4. Confirm the end of the date range you are interested in, and whether the date is inclusive (le) or exclusive (lt)

    1. The example below assumes an end date of: le2018-12-31

  5. Make the call as detailed below, replacing the access token and search parameters with your own values

  6. The matching Consent resources will be returned in the search results

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X GET --header "Accept: application/fhir+json" --header "Authorization: Bearer aaaaa-bbbbb" "https://sandbox.patientsknowbest.com/fhir/Observation/$group?category=http://fhir.patientsknowbest.com/codesystem/observation-category|LABORATORY&patient=Patient/3d8afd18-0844-459a-b3c2-355d02e54c0a&date=ge2018-01-01&date=le2018-12-31"

Check the current user's purview

This example demonstrates how to execute the Purview operation.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    • The example below assumes you have been granted an access token of: aaaaa-bbbbb

  2. Make the call as detailed below, replacing the access token with your own value

  3. Your purview will be returned in the operation response

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X GET --header "Accept: application/fhir+json" --header "Authorization: Bearer aaaaa-bbbbb" "https://sandbox.patientsknowbest.com/fhir/Consent/$purview"

Check whether a specific document has been read

This example demonstrates how to check whether a single, specific document has been read.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: eyJhbGxxxx

  2. Confirm the ID of the Organization

    1. The example below assumes you have an ID of: 235a397b-1ae8-4755-9c77-1a0e2fbc5314

  3. Confirm the identifier of the document

    1. The example below assumes an identifier of: 97a25402-622b-47e0-b650-bbbd08de4daf

  4. Make the call as detailed below, replacing the access token, organisation ID and document ID with your own values

    1. The read indicator will be returned

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X POST --header "Accept: application/fhir+json" --header "Content-Type: application/fhir+json" --header "Authorization: Bearer eyJhbGxxxx" --header "X-Org-Public-Id: 235a397b-1ae8-4755-9c77-1a0e2fbc5314" "https://sandbox.patientsknowbest.com/fhir/DocumentReference/$read-receipt-query" --data "{ \"resourceType\": \"Parameters\", \"parameter\": [ { \"name\": \"documentIdentifier\", \"valueString\": \"97a25402-622b-47e0-b650-bbbd08de4daf\" } ] }"

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType": "Parameters", "parameter": [ { "name": "documentIdentifier", "valueString": "97a25402-622b-47e0-b650-bbbd08de4daf" } ] }

Example response

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType" : "Parameters", "parameter" : [ { "name" : "read_receipt", "part" : [ { "name" : "documentIdentifier", "valueString" : "97a25402-622b-47e0-b650-bbbd08de4daf" }, { "name" : "read", "valueBoolean" : true } ] } ] }

Check the status of a specific patient

This example demonstrates how to check the status of a single, specific patient based on their NHS number.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: eyJhbGxxxx

  2. Confirm the ID of the Organization

    1. The example below assumes you have an ID of: 235a397b-1ae8-4755-9c77-1a0e2fbc5314

  3. Confirm the NHS number of the patient

    1. The example below assumes an NHS number of: 9999999999

  4. Make the call as detailed below, replacing the access token, organisation ID and NHS number with your own values

    1. The status information will be returned

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X POST --header "Accept: application/fhir+json" --header "Content-Type: application/fhir+json" --header "Authorization: Bearer eyJhbGxxxx" --header "X-Org-Public-Id: 235a397b-1ae8-4755-9c77-1a0e2fbc5314" "https://sandbox.patientsknowbest.com/fhir/Patient/$status-query" --data "{ \"resourceType\": \"Parameters\", \"parameter\": [ { \"name\": \"patientIdentifier\", \"valueIdentifier\": { \"system\": \"https://fhir.nhs.uk/Id/nhs-number\", \"value\": \"9999999999\" } } ] }"

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType": "Parameters", "parameter": [ { "name": "patientIdentifier", "valueIdentifier": { "system": "https://fhir.nhs.uk/Id/nhs-number", "value": "9999999999" } } ] }

Example response

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{ "resourceType" : "Parameters", "parameter" : [ { "name" : "patientStatus", "part" : [ { "name" : "patientIdentifier", "valueIdentifier": { "system": "https://fhir.nhs.uk/Id/nhs-number", "value": "9999999999" } }, { "name" : "registered", "valueBoolean" : true }, { "name" : "deceased", "valueBoolean" : false }, { "name" : "dateOfBirth", "valueDate" : "1920-01-01" } ] } ] }

Trigger a questionnaire request for a specific Patient as a System client

This example demonstrates how to trigger a questionnaire request for a specific Patient.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: aaaaa-bbbbb

  2. Confirm the ID of the Organization (PKB clinical team)

    1. The example below assumes you have an Organization ID of: 235a397b-1ae8-4755-9c77-1a0e2fbc5314

  3. Confirm the ID of the Patient, you can do so by searching it using their NHS number

    1. The example below assumes you have an Patient ID of: ca9db36c-1b77-4d12-9246-d78fa5d13e8c

  4. Confirm the ID of the Questionnaire, you can do so by using the Questionnaire Search

    1. The example below assumes a Questionnaire ID of: bd17e556-20e3-4f01-8078-30e5f675b0f2

  5. Confirm the ID of the practitioner on behalf of which the communications will be sent to the patient through PKB

    1. This currently needs to be provided by PKB, the example below assumes a practitioner ID of: bdaa24d0-3cd5-469c-aa69-db676fa31bbe

  6. If you wish to add an optional Identifier to the Questionnaire Request that will be created during the operation, confirm through your own system the corresponding ID

    1. The example below assumes the following identifier: {"system":"org-uuid","value":"id-value"}

  7. Make the call as detailed below, replacing the access token, Organization ID, Patient ID, Questionnaire ID, Practitioner ID and optional internal ID with your own values

    1. The questionnaire request will be created and communications will be sent to the Patient through PKB UI.

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X POST --header "Accept: application/fhir+json" --header "Content-Type: application/fhir+json" --header "Authorization: Bearer aaaaa-bbbbb" --header "X-Org-Public-Id: 235a397b-1ae8-4755-9c77-1a0e2fbc5314" "https://sandbox.patientsknowbest.com/fhir/Questionnaire/bd17e556-20e3-4f01-8078-30e5f675b0f2/$send-questionnaire-request" --data "{\"resourceType\":\"Parameters\",\"parameter\":[{\"name\":\"target\",\"valueReference\":{\"reference\":\"Patient/ca9db36c-1b77-4d12-9246-d78fa5d13e8c\"}},{\"name\":\"requestor\",\"valueReference\":{\"reference\":\"Practitioner/bdaa24d0-3cd5-469c-aa69-db676fa31bbe\"}},{\"name\":\"additionalIdentifier\",\"valueIdentifier\":{\"system\":\"org-uuid\",\"value\":\"id-value\"}}]}

Pretty-printed request body

{
  "resourceType":"Parameters",
  "parameter":[
     {
        "name":"target",
        "valueReference":{
           "reference":"Patient/ca9db36c-1b77-4d12-9246-d78fa5d13e8c"
        }
     },
     {
        "name":"requestor",
        "valueReference":{
           "reference":"Practitioner/bdaa24d0-3cd5-469c-aa69-db676fa31bbe"
        }
     },
     {
        "name":"additionalIdentifier",
        "valueIdentifier":{
           "system":"org-uuid",
           "value":"id-value"
        }
     }
  ]
}

Example response

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{
   "resourceType":"Parameters",
   "parameter":[
      {
         "name":"request",
         "valueReference":{
            "reference":"ProcedureRequest/2f292349-6893-4813-868b-ec00e8318c8c"
         }
      }
   ]
}

Trigger questionnaire requests for all Patients in a team as a System client

This example demonstrates how to trigger questionnaire requests for all Patients within a team. Please note we currently only support this operation for teams of 32 patients or less.

  1. Generate an access token by following the OAuth 2.0 walkthrough

    1. The example below assumes you have been granted an access token of: aaaaa-bbbbb

  2. Confirm the ID of the Organization (organisation)

    1. The example below assumes you have an organisation ID of: 235a397b-1ae8-4755-9c77-1a0e2fbc5314

  3. Confirm the ID of the Organization (team)

    1. The example below assumes you have an team ID of: ca9db36c-1b77-4d12-9246-d78fa5d13e8c

  4. Confirm the ID of the Questionnaire, you can do so by using the Questionnaire Search

    1. The example below assumes a Questionnaire ID of: bd17e556-20e3-4f01-8078-30e5f675b0f2

  5. Confirm the ID of the practitioner on behalf of which the communications will be sent to the patient through PKB

    1. This currently needs to be provided by PKB, the example below assumes a practitioner ID of: bdaa24d0-3cd5-469c-aa69-db676fa31bbe

  6. Make the call as detailed below, replacing the access token, both Organization IDs, Patient ID, Questionnaire ID and Practitioner ID with your own values

    1. The questionnaire requests will be created and communications will be sent to all the Patients in the Organization through PKB UI.

Example request

This example is written for http://sandbox.patientsknowbest.com; replace the URL as needed if you are connecting to a different environment.

curl -X POST --header "Accept: application/fhir+json" --header "Content-Type: application/fhir+json" --header "Authorization: Bearer aaaaa-bbbbb" --header "X-Org-Public-Id: 235a397b-1ae8-4755-9c77-1a0e2fbc5314" "https://sandbox.patientsknowbest.com/fhir/Questionnaire/bd17e556-20e3-4f01-8078-30e5f675b0f2/$send-questionnaire-request" --data "{\"resourceType\":\"Parameters\",\"parameter\":[{\"name\":\"target\",\"valueReference\":{\"reference\":\"Organization/ca9db36c-1b77-4d12-9246-d78fa5d13e8c\"}},{\"name\":\"requestor\",\"valueReference\":{\"reference\":\"Practitioner/bdaa24d0-3cd5-469c-aa69-db676fa31bbe\"}}]}

Pretty-printed request body

{
  "resourceType":"Parameters",
  "parameter":[
     {
        "name":"target",
        "valueReference":{
           "reference":"Organization/ca9db36c-1b77-4d12-9246-d78fa5d13e8c"
        }
     },
     {
        "name":"requestor",
        "valueReference":{
           "reference":"Practitioner/bdaa24d0-3cd5-469c-aa69-db676fa31bbe"
        }
     }
  ]
}

Example response

Note: whilst every effort has been made to ensure that the examples are correct and useful, they do not form part of the official specification.

{
  "resourceType":"Parameters",
  "parameter":[
     {
        "name":"request",
        "valueReference":{
           "reference":"ProcedureRequest/6a326b8c-d03b-42f5-9e8f-e708ac12a26c"
        }
     },
     {
        "name":"request",
        "valueReference":{
           "reference":"ProcedureRequest/be54a62e-b263-4151-b244-e7e912682c49"
        }
     }
  ]
}

  • No labels