Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Following instruction on this page you can test if your network traffic can flow both ways between your host and our servers.

On the host that runs your service run the next command:

echo quit | timeout 3 telnet my.patientsknowbest.com 443

Above command will try for three seconds to connect to one of our servers (my.patientsknowbest.com).

TIP: You might need to change the hostname my.patientsknowbest.com depending on what API you are trying to reach. To get the relevant hostname consult our PKB API Network Connectivity page.

Expected success output

Trying 35.246.122.93...
Connected to my.patientsknowbest.com.
Escape character is '^]'.
Connection closed by foreign host.

Presence of Connected to my.patientsknowbest.com. indicate success.

Expected failure output

Trying 35.246.122.93...

Absence of Connected to my.patientsknowbest.com. indicates failure.

Trouble shooting

There might be multiple reasons why above check failed.

On the host that runs your service run the next command:

timeout 3 nmap my.patientsknowbest.com -p 443

Expected success output

Starting Nmap 7.95 ( https://nmap.org ) at 2024-11-14 15:30 CET
Nmap scan report for my.patientsknowbest.com (35.246.122.93)
Host is up (0.018s latency).
rDNS record for 35.246.122.93: 93.122.246.35.bc.googleusercontent.com

PORT    STATE SERVICE
443/tcp open  https

Nmap done: 1 IP address (1 host up) scanned in 0.13 seconds

443/tcp open https indicates that packets can reach our servers.

Expected failure outputs

Network error
Starting Nmap 7.95 ( https://nmap.org ) at 2024-11-26 11:44 CET

Absence of Nmap scan report for my.patientsknowbest.com (35.246.122.93and more output lines indicate that your client cannot establish a network connection to our server.

This is most likely caused by firewall rules of your organizations not allowing egress towards us.

NEXT: Try to resolve the issue within your organization.

We reject your traffic

TIP: This failure should only happen for APIs where we implemented IP allow listing, such as HL7.

Starting Nmap 7.95 ( https://nmap.org ) at 2024-11-14 15:30 CET
Nmap scan report for my.patientsknowbest.com (35.246.122.93)
Host is up (0.018s latency).
rDNS record for 35.246.122.93: 93.122.246.35.bc.googleusercontent.com

PORT    STATE     SERVICE
443/tcp filtered  https

Nmap done: 1 IP address (1 host up) scanned in 0.13 seconds

NEXT: Make sure your send traffic from an IP address that you previously whitelisted with us.

Server is down
Starting Nmap 7.95 ( https://nmap.org ) at 2024-11-15 10:03 CET
Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn
Nmap done: 1 IP address (0 hosts up) scanned in 3.02 seconds

Note: Host seems down. indicates some network error or the host is really down.

NEXT: Visit https://www.pkbstatus.com/ and look out comms from us.

  • No labels